How to install and run Android 12L on your PC (simple guide)

Rate this post

The whole technology is constantly moving to new frontiers. However, this also means that the performance of the old hardware will gradually slow down when it comes to running the new operating system. However, there are many ways to significantly improve the performance of your computer. Chrome OS Flex was one such example, but the other was recently released. Bliss OS, Android-based open source OS. Fortunately, Bliss OS has released an alpha version of Bliss OS 15 that provides Android 12L to PC users. Therefore, if you are some of the users who are considering turning on their PC and enjoying Android 12L at the same time, please continue reading.

Run Android 12L on a Windows PC (2022)

This guide will guide you through the process of installing Android 12L on your PC, but you can also easily compare it with ChromeOS Flex. If you want to read it, use the table below to read it.

Requirements and considerations for running Android 12L

The process itself is simple enough, but there are some things you need to do to properly install Android 12L. Before you start, make sure the following items are checked:

1. BlissOS15 build

To use it on your PC, you need to download the initial test OS15 build from the Bliss website. The process itself isn’t as easy as double-clicking, so Bliss has a small test that needs to be passed. However, to save time, just download the latest one. BlissOS 15 (obtained) From this link, set it aside for now.

2. Rufus

The downloaded build is in ISO format and must be burned to a USB drive. Rufus is a great utility software to help you quickly create a bootable USB drive. Be sure to download Rufus (Get) and install it on your PC before you start.

3. USB pen drive

You will also need a USB pen drive as it will be used to install and view Android 12L on your target computer. Be sure to cover it before you start.

4. Prepare for bugs and glitches

This BlissOS Alpha build is in the very early stages, so it’s not surprising that there are many bugs out there. If you’re thinking of using this build as your everyday driver, we recommend that you advise it and preview it first instead. Please be assured that we will also show you how to do this. However, keep in mind the early nature of the build when continuing with the installation.

How to install Android 12L on your PC

Ready to get started? The process of installing 12L on your PC is very simple. Follow me as I show you to move on:

Burn the ISO image to a USB drive

Let’s start by making the USB drive bootable with the BlissOS15 build. You have to do this regardless Decide whether to preview or install the OS. Insert the pen drive into your PC and follow the steps below.

1. Open Rufus on your computer to get started. Click the drop-down button next to’and select your USB drive.device‘.

2. In addition to boot selection, click ‘selectClick the’button to select the ISO file.

Selection button

3. Change to the directory where you saved the build. In my case, I did that on my desktop.

Select build

4. Just press’start‘ button. No other settings need to be changed.

Start button

5. A pop-up box will appear asking you in the mode to write the image. select ‘Write in ISO image mode‘Next, continue.

Write in ISO mode

6. Press’all right‘I agree with Rufus to format the pen drive.

Pen drive destruction

7. Depending on your PC, the process may take 2-10 minutes. When complete, you will see the following message and you can press Close to eject the pen drive.

Android12L Rufus is complete

Install Android 12L on your PC – Ready

If you like to navigate the portable version of Android 12L, you can go ahead and install it on your PC. However, as mentioned earlier, keep in mind that early builds may contain some bugs, and they do. For example- At this point, Bluetooth doesn’t seem to be working. If you’re doing delicate work, we recommend that you continue to use the stock OS. However, if you still want to continue, First you need to create another partition On our system before installation. Use a Windows 10 laptop for this. For similar settings, follow the steps below.

1. Press Win + R “”Enterdiskmgmt.mscIn the run window, select and press Enter.[ディスクの管理]A window will open.

2. Now you need to find the unallocated space in the drive and create a volume or shrink an existing volume.Make sure the space comes out At least 50GB..

Shrink partition

3. When the unallocated space appears, right-click on it and press’.New simple volume‘.

How to run Android 12L on PC

4. Follow the setup wizard to assign letters and names to the drives. You can leave the rest of the settings as they are.

label

5. Click end A new partition will be created.

Now you are ready to install Android 12L on your PC. To do this, follow the sections below.

Install Android 12L

Once everything is set up, let’s start by installing Android on your system. To do this, follow these steps:

1. As in the previous preview section, insert the USB drive into your PC and shut it down.

2. Go to your PC’s BIOS and boot menu and boot the pen drive again. The Android main menu will be displayed again.

3. However, this time use the keyboard to scroll to the bottom and select “”.Android-x862022-03-16 installation‘, Press Enter.

4. From the menu that appears, select the partition you created earlier and press Enter to select it.

How to run Android 12L on PC

5. On the next screen, selectext4‘And press Enter. This will start reformatting the partition and may take a few minutes.

How to run Android 12L on PC

6. You will see some pop-up boxes.Simply say Yes To all of them to continue the installation.

The process itself takes 15-20 minutes and when completed you can choose to boot Android or return to the BIOS. And it’s that easy! but, Remember You need to boot the BIOS every time you choose a Windows / Android partition. Now, enjoy Android 12L on your PC!

Preview Android 12L instead

This section is intended for users who want to experience Android 12L on their PC but are not fully prepared to install it. Fortunately, the Bliss OS ISO build has a preview feature that runs from the USB drive itself. Make sure you have burned the ISO image to the pen drive before continuing. When you’re done, follow these steps:

1. Shut down your PC and insert the USB drive into the computer you want to try this out.

2. Press Power on Button and as soon as you do, repeat Tap the key to go to the BIOS of your PC.. Keys can vary from manufacturer to manufacturer, but most often between F2, F8, and F12.

Boot menu Android 12L

3. Reach the PC’s BIOS interface. from here, Boot menu Option to select pen drive. As you can see, for my ASUS PC, just press the F8 key.

Boot menu BIOS

4. When you enter the boot menu, you will see the main hard drive and the pen drive below it. Use the arrow keys to highlight the pen drive and press Enter to boot.

Select PDandroid12L

5. Now your PC will start reading from this USB drive and after a while it will appear in the menu. This will bring up a list of USB drive menus.

6. From the list of options displayed[‘]Choose.Android-x862022-03-16 Live‘And press Enter to boot.

Live preview

7. Now your PC will start booting with Android 12L build. This may take some time, depending on your USB drive and PC.that too It is important to be careful not to remove the USB drive at any stage.. And if you get a warning, don’t worry. Continue the boot process.

Hello android

congratulation! This will bring up the Android setup screen. Feel free to set up the OS, connect to Wi-Fi, and experience Android on your PC! but, Remember After shutting down your PC, you will need to set it up again. If you think the preview version is stable enough, follow the sections below to find out how to install it.

First impression of 12L

From the first use of Android 12L on a PC, BlissOS developers have done a great job of implementing code on Android.I’m running Android 12L on my PC during the preview Definitely feels fast It’s smoother than Windows. One of the biggest benefits of Bliss OS 15 Android builds is Pre-installed Google app.. In terms of overall design, this 12L build shares traditional Android aspects and elements in combination with Material Elements. It was a lot of fun to set up the Google Clock Android 12 widget on the home screen while using various launchers on the PC to liven up the experience.

Comparing the Android 12L build with Chrome OS Flex, there is little difference in terms of overall smoothness. However, if you perfectly duplicate Android elements and gestures and combine various keyboard shortcuts, 12L will be an Android-like fun experience. If you love Android and want to install it on your PC without slowing down, check it out. If you want to keep your computer fast and improve your PC experience, learn how to install ChromeOS Flex here.

Speed ​​up your PC with Android 12L

We hope you enjoy Android by accelerating your PC with this latest Bliss OS build. Once all the setup is complete, try these best Android multiplayer games to see if you can play any of them in this build. Are you having problems? Ask questions in the comments below!